Showing posts with label Peace. Show all posts
Showing posts with label Peace. Show all posts

Wednesday, December 23, 2020

Nativity Triptych-A Peek-a-Boo-Project

I love religious iconic art and have been lucky enough to see “The Book of Kells” while visiting Dublin, Ireland. It is illuminated manuscript of the four gospels of the Christian New Testament. It is said to be the most famous of the medieval illuminated manuscripts for the intricacies, detail, and majesty of the illustrations. This is the inspiration for this instillation.
               
               
Supplies:  GSLC-Vintage Triptych Florentine, Iconic Religious Images of Your Choosing,  Old Text Pages, UHU Glue Stick, Damp Cloth, Matte Medium, Ferro Steelblue Texture Paint, Gothic Stencil, Small Plastic Stencil, Paintbrush, Antique Gold Acrylic Paint, Quinacridone Nickle Azo Gold Acrylic Paint, Seth Apter Izink Spray Honey and Baked Texture Vintage Beeswax Embossing Powders, Heating Tool, Ranger Liquid Pearl Juniper, Pencil, Scissors, Weldbond, Metal Clamps, Strips of Leather, Awl, Miniature Screws, Screwdriver, Metal Clasp Closure
1.  Use a UHU Glue Sick to randomly glue Old Text Pages to Gypsy Soul Laser Cuts-Vintage Triptych Florentine.
2.  Once pages are dry use a damp cloth to wipe away excess paper.
3.  Add additional pieces of crumpled old text to triptych with a paintbrush and matte medium.
4.  Once fully dry us a dry brush technique to randomly paint triptych with Antique Gold Acrylic Paint, Quinacridone Nickle Azo Gold Acrylic Paint.
5.   After triptych is dry again use a small plastic spatula to add Ferro Steelblue Texture paste through a Gothic stencil.
6.   Spray with Seth Apter Izink Spray Honey and while still wet sprinkle with Baked Texture Vintage Beeswax Embossing Powders.
7.  Cure using a heating tool.
8.  Add centers to middle of stenciled parts using Ranger Liquid Pearl Juniper.
9.  Use Center of GSLC Triptych to trace and cut out image you have prepared to use.
10.                Use Weldbond to add images to center and side panels of GSLC Triptych.
11.                Seal entire piece with Matte Medium.
12.                Assemble middle portion frame and allow to dry fully.
13.                When all pieces are dry use metal clamps to secure top portion to bottom portion.
14.                Glue two strips of leather around triptych using Weldbond to secure into place.
15.                Once dry, use an awl to punch holes into the leather and add miniature screws.
16.                Last step is to add a metal clasp closure.

Some Final Thoughts.
 
 
One of my Favorite Winter Song is sung by Tori Amos - "Holly, Ivy and Rose" - Bing video.

Lo, how a Rose e'er blooming
From tender stem hath sprung!
Of Jesse's lineage coming
By ancient sibyls sung

A rose doth bear a flower
All in the cold midwinter
And at the midnight hour

And he waits for who to find
The heart she left behind
And he prays she'll find her way
To be his bride someday

Ivy
Of all the trees in the wood
Holly wants/woos the Rose
Holly and the Ivy
When they are both full grown
Of all the trees in the wood
Holly bears the crown
Holly and the Ivy
The running of the deer
For his Rose to bloom
Holly waits every year.
 
 








Wednesday, November 11, 2020

Autumnal Animals Assemblage-A Peek-a-Boo-Project

Walks in Autumn Woodlands are some of my favorites and I often imagine the childhood song “The Teddy Bears Picnic” as I stroll along. These are the inspirations for this instillation. Just like a walk in the woods discovering what lies around each bend was the progression of this project. It had many twists and turns, come along for my meandering imaginations.
 
 
Supplies:  Gypsy Soul Laser Cuts-Chunky ATC Blanks, Gypsy Soul Laser Cuts-Fold Up Box Oval , Gypsy Soul Laser Cuts-ATC Ticket Journal, Images Collected from Pinterest and Personal Photographs, Editing Program, Power Point App, Printer, Scissors, Weldbond, Scrap of Pictorial Paper I used TH  Abandoned Halloween Paper, Sandpaper Block, Black Sharpie Matte Medium, TH Distress Stain Gathered Twig, Paintbrush, Ferro Texture Paint Celtic and Copper, Small Plastic Spatula, TH Distress Sprays-Antique Linen and Carved Pumpkin, TH Distress Oxide Sprays-Amber, Marmalade, Pistachio, Cheap Hair Spray, Washi Tape, UHU Glue Stick, Miniature Leaf Punch, Random Magazine Images,
1.    I’ve always wanted to have my own line of Scrapbook Papers. This begins a long-involved process that I hope one day will materialize. For this project I looked through Pinterest for images of woodland Animals, Mushrooms, and Tapestries.
 
 
2.     Once I found what I was looking for, hours later…I used Microsoft Word and Power Point to remove image backgrounds, shrink and layer them into the pieces I used for the fronts of these Gypsy Soul Laser Cuts-Chunky ATC Blanks.
 
 
3.    I cut out prepared layered images and glued them to the front of the GSLC Chunky ATCs.
 
4.    Once dried I traced and cut out pieces of TH Abandoned Paper for the back of the GSLC ATCs.
5.     Sand Edges with a Sandpaper Block.
6.    Use a Black Sharpie of the edges of the GSLC ATCs.
7.    Seal GSLC ATCs with a glaze made of Matte Medium and TH Gathered Twig Distress Stain.
8.    Once dry I realized I wanted something to hold my super cool GSLC ATCs.
9.    Going through my stash I settled on the Gypsy Soul Laser Cuts-Fold Up Box Oval.
10.                     Randomly use a small plastic spatula to apply Ferro Texture Paint in Celtic and Copper.
11.                   Once Dry Spray with TH Distress Sprays-I used Antique Linen and Carved Pumpkin, following by TH Distress Oxide Sprays- I used Amber, Marmalade, and Pistachio.

12.                   Seal everything in with hairspray.
13.                   Assemble Gypsy Soul Laser Cuts-Fold Up Box Oval using Weldbond to hold into place. Box with Matte Medium.
 
14.                   Now I realized I needed more items to fill my box so once again I went through my stash and found a Gypsy Soul Laser Cuts-ATC Ticket Journal.
 
15.                    I wanted to keep the look somewhat rustic, so I did not add any medium to the journal. I searched through my photographs and settled on a few of my fall favorites. Once I resized them, I made photocopies.
16.                   I wanted to reinforce the GSLC ATC Ticket Journal, so I added some strips of washi tape securing with a UHU Gluestick.
17.                   I then used the UHU Gluestick to add my prepared and cut out photographs.
18.                   To keep with the woodland animal theme, I used UHU Glue to add bits of another washi tape I had.
19.                   Last layer was to add autumn leaves made using a miniature leaf punch and random magazine images.
20.                   I added them using Weldbond and sealing with Matte Medium. 


Some Final Thoughts.
 
 
 

“If you go down in the woods today, you’re in for a sure surprise…see them gaily gad about, they love to play and shout. They never have any cares…Today’s the day the teddy bears have their picnic”
Another favorite musical of ours is “Into the Woods” So many wonderful songs and profound truths.
“The way is dark, the light is dim, the chances look small the choices look grim, but everything you learn there, will help when you return there. The light is getting dimmer… I think I see a glimmer. Into the woods—you have to grope, but that’s the way you learn to cope. Into the wood to find there’s hope of getting through the journey.”

I think it is time for me to re-watch it now.